Just checked. No protective film.
What have you bought for your Zed this week?
- Thread starter bombur
- Start date
Just checked. No protective film.
What! - don't keep em 2 minutes you
Kettle and pot springs to mind!What! - don't keep em 2 minutes you
Only my third Zed and wont be staying long
Don't fancy a Silver M44 do you?
He's been there, done that.
Tony.
Tony.
I got this, but can you guess what for?
Tony.
Tony.
It would be an E89 if i ever parted with the E85
C'mon Tony. I'm on the edge of me seat here. Wot's it for?
I'll show you tomorrow. It made such a difference too.
Tony.
Tony.
As a completely wild guess, are you trying to cure a rattle or hold a a defrost vent in place?
Still a couple of months wait for the rebody kit to arrive but I've started collecting some bits.
Couple of days ago I ordered stuff from Andy to retro-fit power raise/lower hood to my Z3. I can get that fitted and working before the kit arrives.
But today I ordered side gills for the 507 re-body. Decided on the M3 gills which should, when fitted, look like this - I hope.
Gills weren't expensive so I might try to bodge about with them a bit and buy another pair if I mess it up. I didn't notice before ordering that there's a small recess near the front for an M badge. Can't see it on the shot where it's fitted to the wing. Maybe there's another without the recess. I do kinda like the way it looks without a badge but I might see if I can slot something in there.
Couple of days ago I ordered stuff from Andy to retro-fit power raise/lower hood to my Z3. I can get that fitted and working before the kit arrives.
But today I ordered side gills for the 507 re-body. Decided on the M3 gills which should, when fitted, look like this - I hope.
Gills weren't expensive so I might try to bodge about with them a bit and buy another pair if I mess it up. I didn't notice before ordering that there's a small recess near the front for an M badge. Can't see it on the shot where it's fitted to the wing. Maybe there's another without the recess. I do kinda like the way it looks without a badge but I might see if I can slot something in there.
Last edited:
So just scored a wheel off the bay for £22 quid (yes. twenty two)
Not sure I'd want it in a Z3 but it does look kinda Retro don't you think? (for my 507 rebody)
Apparently this style wheel was an option on z3's?
Is it going to fit? Does it need any extra stuff? Will the airbag connect? (or is the bag going to explode out of the box when I unpack it)?
For the price I can chuck it in the bin if it's pants. Or put it back on the bay starting at 22 quid.
Not sure I'd want it in a Z3 but it does look kinda Retro don't you think? (for my 507 rebody)
Apparently this style wheel was an option on z3's?
Is it going to fit? Does it need any extra stuff? Will the airbag connect? (or is the bag going to explode out of the box when I unpack it)?
For the price I can chuck it in the bin if it's pants. Or put it back on the bay starting at 22 quid.
. £40 worth it for peace of mind and a 10 year younger tyre
- Joined
- Mar 10, 2022
- Points
- 93
- Model of Z
- Z3 3.0 Auto
I like it' but i dont kniw if it will work
What was it for . . . . .
What was it for?
Well it was to stabilise my rear view camera. I cut a strip about 6mm wide and stuck it to the bottom edge of the camera which then stuck to the acrylic in my wind deflector as in the pictures.
Absolutely brilliant, the camera doesn't vibrate now.
Tony.
What was it for?
Well it was to stabilise my rear view camera. I cut a strip about 6mm wide and stuck it to the bottom edge of the camera which then stuck to the acrylic in my wind deflector as in the pictures.
Absolutely brilliant, the camera doesn't vibrate now.
Tony.
Wow, £22 is amazing. I have a ‘sport’ wheel like the one in the photo (not the car’s original wheel) and I want to return to the M sport wheel. I’ve bought an M sport wheel, but without the slip ring. Currently trying to figure out if it has the correct airbag and whether my existing slip ring will work.
Last edited:
Tonneau cover from STEVO7682 met up with him when I was in Ayr 2 weeks ago and just back now from that holiday. So fitted today, despite swearing blind I didn’t need one I do think it looks great. Thanks Stephen it was a pleasure to meet you and talk Z’s.
