Randall M
Dedicated Member
Bought these awhile back, but I installed them today for the next autocross in a couple weeks.
What have you bought for your Zed this week?
- Thread starter bombur
- Start date
- Joined
- Oct 22, 2016
- Points
- 51
- Model of Z
- Z4 E89
I bought a coolant expansion tank.
OldFogey99
Dedicated Member
- Joined
- Sep 22, 2024
- Points
- 29
OEM or a modified version?
- Joined
- Oct 22, 2016
- Points
- 51
- Model of Z
- Z4 E89
I bought a Febi one which fitted perfectly.
- Joined
- Oct 22, 2016
- Points
- 51
- Model of Z
- Z4 E89
Photo of it fitted. An easy job.
Attachments
Saving the planet with a reusable air filter 
....... plus a new set of plugs....overheated two of my previous set (don't tell Gretta
!!!!!)
....... plus a new set of plugs....overheated two of my previous set (don't tell Gretta!!!!!)
New spark plugs to go in soon:
Along with a coolant drain/flush:
Interesting label - I shouldn't have to do this again any time soon
And, finally new PPF for the inner wings.
Here's a before picture - showing the scabby old PPF:
If it didn't come off in hundreds of tiny pieces I'd have had it all done at the weekend.
But, between the showers, it took me a couple of hours. This is after:
I'm not looking forward to doing the other side but I am pleased that I'm rolling back the years on this vehicle, one small job at a time.
Along with a coolant drain/flush:
Interesting label - I shouldn't have to do this again any time soon
And, finally new PPF for the inner wings.
Here's a before picture - showing the scabby old PPF:
If it didn't come off in hundreds of tiny pieces I'd have had it all done at the weekend.
But, between the showers, it took me a couple of hours. This is after:
I'm not looking forward to doing the other side but I am pleased that I'm rolling back the years on this vehicle, one small job at a time.
Last edited:
Maybe try some Tar & Glue on thatNew spark plugs to go in soon:View attachment 351217
Along with a coolant drain/flush:
View attachment 351219
Interesting label - I shouldn't have to do this again any time soon
And, finally new PPF for the inner wings.
Here's a before picture - showing the scabby old PPF:
View attachment 351221
If it didn't come off in hundreds of tiny pieces I'd have had it all done at the weekend.
But, between the showers, it took me a couple of hours. This is after:
View attachment 351227
I'm not looking forward to doing the other side but I am pleased that I'm rolling back the years on this vehicle, one small job at a time.
Front middle and rear strut tower/body braces.
K&N air filter. Denso TT iridium spark plugs.
Radiator and expansion tank/cap. Water pump. Thermostat. Hoses. Temp sensor. Belts. Pulleys and tensioner - ready for an Aussie summer of 40c.
Now looking for upgraded sway bars next...
K&N air filter. Denso TT iridium spark plugs.
Radiator and expansion tank/cap. Water pump. Thermostat. Hoses. Temp sensor. Belts. Pulleys and tensioner - ready for an Aussie summer of 40c.
Now looking for upgraded sway bars next...
ABS adaptor rings. I am colleting parts to fit a 210mm diff with E34 outter drive flanges. These have larger spline counts and will also give me larger stronger CV joints. I have the diff and outter drive flanges and was looking at modifying them to fit ABS rings when I stubbled across the adaptors already made. Will clean up my spare subframe and trailing arms this winter and once the diff is mounted sort out CV shafts.
