Wanted Exhaust Vibration Damper

[bmwz3tower]

Hi, I'm looking for the clamp for the exhaust vibration damper for my 1997 1.9 z3. Its just the clamp I need not the rubber damper. I've attached photos my rusted out clamp. Also the damper and a screenshot of what it's supposed to look like for reference.

 

[Althulas]

Have you tried searching the part number on eBay or google to see what hits you can get. Just input your car details on a Realoem if you was not aware of the site.

 

[bmwz3tower]

Have you tried searching the part number on eBay or google to see what hits you can get. Just input your car details on a Realoem if you was not aware of the site.

Yes, but the realoem diagram doesn't show the actual part and seller on ebay only sell the entire assembly.

 

[Althulas]

is this what your after it looks similar from your pics?

https://www.turnermotorsport.com/p-48139-18301435672-genuine-bmw-part/?

If so I got part number 18301435672

https://ebay.io/m/E4IaTM

I would try your local dealer with that part number, I usually find the parts department helpful.

 

[IainP]

Yes, but the realoem diagram doesn't show the actual part and seller on ebay only sell the entire assembly.

Simple fix is buy a D exhaust clamp of the correct diameter for your exhaust pipe from eBay/Halfords/auto shop. A set of m8 rod connector nuts from Screwfix/Toolstation (£3 from memory).
Loctite a connector nut to the rubber, tighten the D clamp to the pipe, tighten the connector nut to one of the threaded sides of the D clamp. Job done.